Nissan Rogue (T33) 2021-Present Service Manual: Brake Branch Line Circuit (chassis Can Communication 2 Circuit)

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Lan System / Can :: Dtc/circuit Diagnosis / Brake Branch Line Circuit (chassis Can Communication 2 Circuit)

Diagnosis Procedure

CHECK CONNECTOR

  1. Ignition switch OFF.

  2. Disconnect the battery cable from the negative terminal.

  3. Check the terminals and connectors of the electrically-driven intelligent brake unit for damage, bend and loose connection (unit side and connector side).

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair the terminal and connector.

CHECK HARNESS FOR OPEN CIRCUIT

  1. Disconnect the connector of electrically-driven intelligent brake unit.

  2. Check the resistance between the electrically-driven intelligent brake unit harness connector terminals.

    Electrically-driven intelligent brake unit harness connector Resistance (Ω)
    Connector No. Terminal No.
    E61 25 16 Approx. 54 – 66

Is the measurement value within the specification?

YES>>

GO TO 3.

NO>>

Repair the electrically-driven intelligent brake unit branch line.

CHECK POWER SUPPLY AND GROUND CIRCUIT

Check the power supply and the ground circuit of the electrically-driven intelligent brake unit. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

Present error: Replace the electrically-driven intelligent brake unit. Refer to Removal & Installation.

YES>>

Past error: Error was detected in the electrically-driven intelligent brake unit branch line.

NO>>

Repair the power supply and the ground circuit.

    Ccm Branch Line Circuit (chassis Can Communication 2 Circuit)
    Diagnosis Procedure CHECK CONNECTOR Ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the chassis control modul...
    Abs Branch Line Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damag...

    Other materials:

    Difference between predictive and actual distances
    Basic information The displayed guide lines and their positions on the ground are intended only as approximate references. When driving the Nissan Rogue on uphill, downhill, or uneven surfaces, or when objects extend outward, the actual distance may differ from what appears on the monitor relative t ...

    Symptom Diagnosis. Easy Fill Tire Alert Does Not Activate
    Description The easy fill tire alert does not function while inflating a tire when the CVT shift selector position is in P-range with the ignition switch ON or with the engine started.NOTE: After starting to inflate the tire, it takes a few seconds for the easy fill tire alert to function. ...

    Dtc/circuit Diagnosis. C18de-82 Brake Power Supply Back up Unit
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C18DE 82 Backup power supply unit communication Diagnosis condition When Ignition switch is ON. Signal (terminal) Brake power supply backup unit signal Threshold When a malfunct ...