Nissan Rogue (T33) 2021-Present Service Manual: Basic Inspection :: Shipping Mode Cancel Operation

Work Procedure

SHIPPING MODE CANCEL OPERATION

  1. Ignition switch OFF.

  2. Push in (switch on) the extended storage fuse switch. Refer to How To Check.

  3. Ignition switch ON.

  4. Ignition switch OFF and wait at least 2 seconds.

>>

GO TO 2.

SHIPPING MODE CANCEL CHECK

  1. Ignition switch ON.

  2. Check that extended storage fuse warning message is not displayed on information display.

>>

Work End.

    Basic Inspection. Configuration (bcm)
    Description Vehicle specification needs to be written with CONSULT because it is not written after replacing the BCM.The configuration requires network connection. CONSULT conne...
    Basic Inspection. Mac Key Writing
    Description When replacing BCM, it is necessary to write MAC key to BCM. Write MAC key to BCM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Wo...

    Other materials:

    Basic information
    Precautions on child restraints WARNING Failure to follow the warnings and instructions for proper child restraint use and installation can lead to serious injury or death to a child or other passengers in a sudden stop or collision inside the Nissan Rogue: The child restraint must alw ...

    Dtc/circuit Diagnosis. U1327-52 Mac Key Update
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition U1327-52 MAC key update (Message authentication code key update) Diagnosis condition - Signal (terminal) - Threshold MAC key writing is incomplete. ...

    Dtc/circuit Diagnosis. Unlock Sensor
    Diagnosis Procedure CHECK UNLOCK SENSOR INPUT SIGNAL Ignition switch OFF. Disconnect front door lock assembly LH connector. Check voltage between front door lock assembly LH harness connector and ground. (+) (–) Voltage (Approx.) Front door lock assembly LH Connector T ...