Nissan Rogue (T33) 2021-Present Service Manual: B2267-87 Engine Speed

Nissan Rogue (T33) 2021-Present Service Manual / Driver Information & Multimedia :: Meter, Warning Lamp & Indicator / Type B :: Dtc/circuit Diagnosis / B2267-87 Engine Speed

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content) 		DTC detected condition
B2267-87

TACHO METER

(Tacho meter) 		Diagnosis condition When ignition switch is ON.
Signal (terminal) Engine speed signal
Threshold Engine speed signal is not input from ECM
Diagnosis delay time 2 seconds or more

POSSIBLE CAUSE

  • Crankshaft position sensor (POS)

  • ECM

FAIL-SAFE

Reset to zero of the tachometer by suspending communication.

DTC CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Ignition switch ON and wait for 2 seconds or more.

  2. Select “Self diagnosis result” mode of “M&A”.

  3. Check DTC.

Is DTC B2267-87 detected?

YES>>

Refer to Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair:Inspection End.

Diagnosis Procedure

PERFORM SELF-DIAGNOSIS OF ECM

CONSULT

Select “Self diagnosis result” mode of “ECM.”

Is DTC detected?

YES>>

Perform diagnosis procedure on the detected DTC. Refer to DTC Index.

NO>>

Inspection End.

    B2267-29 Engine Speed
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition B2267-29 TACHO METER (Tacho meter) Diagnosis condition When i...
    B2268-29 Water Temp
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition B2268-29 WATER TEMP METER (Water temp meter) Diagnosis condit...

    Other materials:

    Information Display (combination Meter)
    Door Open Warning DESIGN/PURPOSEInformation display warns the driver that each door is open or is not fully closed. Symbol Message – SYNCHRONIZATION WITH MASTER WARNING LAMPSynchronization is applied.Refer to Master Warning Lamp.SYSTEM DIAGRAMSIGNAL PATH BCM transmits door switch ...

    Dtc/circuit Diagnosis. U0075-00 Communication Bus C Off
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition U0075-00 Control module comm Bus C Off (Control module communication Bus C Off) Diagnosis condition Ignition switch ON Signal (terminal) CAN communication s ...

    Chassis Can Communication 4 Circuit
    Diagnosis Procedure CHECK NETWORK DIAGNOSIS Check the "Network diagnosis" results from CONSULT to see that the diagnostic CAN communication circuit have no malfunction. Are the diagnostic CAN communication circuit normal? YES>> GO TO 2. NO>> Check and repair diagnostic CAN commu ...