Nissan Rogue Service Manual: Removal and installation

The ambient temperature display is incorrect

Description The displayed outside air temperature is higher than the actual temperature.  The displayed outside air temperature is lower than the actual temperature.  Outside a ...

Combination meter

Removal and Installation REMOVAL  Disconnect the negative battery terminal. Refer to PG-77, "Removal and Installation".  Remove the cluster lid A. Refer to IP-20, "R ...

Other materials:

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description Refer to LAN-8, "System Description". DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms and a present DTC by p ...

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description Refer to LAN-8, "System Description". DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms and a present DTC by p ...

P0112, P0113 IAT sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0112 IAT SEN/CIRCUIT- B1 (Intake air temperature sensor 1 circuit low bank 1) An excessively low voltage from the intake air temperature sensor ...