Nissan Rogue Service Manual: Periodic maintenance

Preparation

Commercial Service Tool Tool name Description Brake drum clearance gauge Measuring rear rotor drum inner diamete Power tool Loosening nuts, s ...

Parking brake system

Inspection and Adjustment INSPECTION Pedal Stroke  Operate the parking brake pedal with a force of 196 N (20.0 kg-f, 44.1 lb-f). Check that the pedal stroke is within the specified num ...

Other materials:

DTC/circuit diagnosis
POWER SUPPLY AND GROUND CIRCUIT BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram". 1. CHECK FUSE Check that the following fuse i ...

Sensor maintenance
Sensor maintenance The distance sensor for the FCW system A is located behind the front bumper. To keep the FCW system operating properly, be sure to observe the following:  Always keep the sensor area of the front bumper clean.  Do not strike or damage the areas around ...

Periodic maintenance
FRONT WHEEL HUB AND KNUCKLE Inspection Move the wheel hub and bearing in an axial direction by hand to verify that looseness of wheel hub and bearing exists. If any looseness exists, replace the wheel hub and bearing. Axial end play : Refer to FAX-32, "Wheel Bearing". Rota ...