Nissan Rogue manuals

Nissan Rogue Service Manual: Basic inspection

IPDM E/R (intelligent power distribution module engine room)
IPDM E/R Terminal Arrangement ...

Battery
How to Handle Battery CAUTION:  If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery.  After connecting battery cab ...

Other materials:

P0138 HO2S2
DTC Description DTC DETECTION LOGIC The heated oxygen sensor 2 has a much longer switching time between rich and lean than the air fuel ratio (A/ F) sensor 1. The oxygen storage capacity of the three way catalyst (manifold) causes the longer switching time. MALFUNCTION A To judge the malfu ...

Brake pedal
Adjustment BRAKE PEDAL HEIGHT  Remove instrument lower panel LH. Refer to IP-22, "Removal and Installation".  Disconnect the harness connectors from the stop lamp switch and brake pedal position switch.  Turn the stop lamp switch and brake pedal position switc ...

Diagnosis and repair work flow
Work Flow NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

В© 2014-2025 Copyright www.nirogue.com