Nissan Rogue (T33) 2021-Present Service Manual: Wiring Diagram :: Fuse, Fusible Link and Relay Box

Wiring Diagram

FUSIBLE LINK BOX (BATTERY)

Refer to Fuse and Fusible Link Arrangement.

FUSIBLE LINK BOX (12V SUB BATTERY) (LITHIUM ION BATTERY)

Refer to Fuse and Fusible Link Arrangement.

FUSE AND FUSIBLE LINK BOX 1

Refer to Fuse and Fusible Link Arrangement.

FUSE AND FUSIBLE LINK BOX 2

Refer to Fuse and Fusible Link Arrangement.

FUSE AND FUSIBLE LINK BOX 3

Refer to Fuse and Fusible Link Arrangement.

FUSE AND FUSIBLE LINK BOX 4

Refer to Fuse and Fusible Link Arrangement.

FUSE AND FUSIBLE LINK BOX 5

Refer to Fuse and Fusible Link Arrangement.

FUSE AND FUSIBLE LINK BOX 6

Refer to Fuse and Fusible Link Arrangement.

RELAY BOX

Refer to Fuse and Fusible Link Arrangement.

    Wiring Diagram. Ground Distribution
    Body Harness Wiring Diagram Refer to Wiring Diagram. Engine Room Harness Wiring Diagram Refer to Wiring Diagram. Engine Control Harness Wiring Diagram ENGINE CONTROL HARNESSRefe...
    Ecu Diagnosis Information. 12v Sub Battery (lithium Ion Battery)
    DTC Index Self Diagnostic Result DTC Display contents of CONSULT Reference P1A00-49 Lithium ion battery 12V DTC Description P1A01-A2 Lithium ion battery 12V DTC Description P1A0...

    Other materials:

    Dtc/circuit Diagnosis. C18fa-44 Programing Incomplete
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C18FA 44 Calibration incomplete Diagnosis condition When Ignition switch is ON. Signal (terminal) — Threshold When programming data is not same. Diagnosis delay time 1 ...

    Dtc/circuit Diagnosis. U1c02-08 Lin Communication
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition U1C02-08 LIN communication (Local interconnect network communication) Diagnosis condition Ignition switch is ON or OFF (auto ACC status). Signal (terminal) ...

    Wireless Charger. Removal and Installation
    Wireless Charger Unit Removal and Installation REMOVALRemove the console finisher assembly. Refer to Removal and Installation. Press the wireless charger unit pawl from the back of the console finisher assembly to remove the wireless charger unit . : Pawl INSTALLATIONNote the followin ...