Nissan Rogue Service Manual: Symptom diagnosis
- Power window control system symptoms
- None of the power windows can be operated using any switch
- Driver side power window does not operate
- Front passenger side power window does not operate
- Rear LH side power window does not operate
- Rear RH side power window does not operate
- Anti-pinch system does not operate normally (driver side)
- Power window retained power operation does not operate properly
- Auto operation does not operate but manual operate normally (driver side)
- Power window lock switch does not function
Door switch
WITH INTELLIGENT KEY
WITH INTELLIGENT KEY : Component Function Check
1.CHECK FUNCTION
Select "DOOR LOCK" of "BCM" using CONSULT.
Select "DOOR SW-DR", ...
Power window control system symptoms
Symptom Table
Symptom
Reference page
None of the power windows can be operated using any switch.
Refer to PWC-55, "Diagnosis Procedure".
Driver side p ...
Other materials:
O/D off indicator lamp
Component Function Check
1.CHECK O/D OFF INDICATOR LAMP FUNCTION
Check O/D OFF indicator lamp turns ON for approx. 2 seconds when ignition
switch turns ON.
Is the inspection results normal?
YES >> INSPECTION END
NO >> Go to TM-181, "Diagnosis Procedure".
Diagnosis Pro ...
P1212 TCS communication line
Description
This CAN communication line is used to control the smooth engine operation
during the TCS operation. Pulse
signals are exchanged between ECM and “ABS actuator and electric unit (control
unit)”.
Be sure to erase the malfunction information such as DTC not only for “ABS
ac ...
Additional service when replacing transaxle assembly
Description
Perform the following work after the transaxle assembly is replaced.
WRITING TCM DATA
TCM performs accurate control by retrieving data (inherent
characteristic value) of each solenoid. For this
reason, after replacing transaxle assembly, it is necessary to write new
d ...
