Nissan Rogue (T33) 2021-Present Service Manual: Steering Switch Signal B Circuit
Component Function Check
PERFORM COMPONENT FUNCTION CHECK
With CONSULT
Check “Self Diagnostic Result” of “MULTI AV”.
Is any DTC detected?
YES>>Perform the trouble diagnosis for the detected DTC. Refer to DTC Index.
NO>>Proceed to Diagnosis Procedure.
Diagnosis Procedure
CHECK STEERING SWITCH SIGNAL B CIRCUIT
Check the steering switch signal B circuit between combination meter and steering switch.
-
FULL TFT METER: Component Function Check
-
7 INCH INFORMATION DISPLAY: Component Function Check
Is the inspection result normal?
YES>>INSPECTION END.
NO>>Repair or replace malfunctioning parts.
Other materials:
Kr15ddt. Preparation. Preparation
Preparation
Special Service Tools
Tool number
Tool name — Description
KV101207S0
Unified fuel lock ring wrench
Removing and installing lock ring
(NI-45747)
Fuel tank lock ring wrench
Always Replace With New Parts
Never Reuse These Parts Part Code For add ...
Electric Shift Control Module
Reference Value
CONSULT DATA MONITOR STANDARD VALUENOTE:
The following table includes information (items)
inapplicable to this Nissan Ariya vehicle. For information (items)
applicable to this vehicle, refer to CONSULT display items.
Monitor item Condition Value/Status (Approx.)
Range po ...
P2b95 Cold Start Control
DTC Description
ECM controls fuel injection timing and fuel injection quantity when engine is started with the engine cold.This control promotes the activation of three way catalyst by heating the catalyst and reduces emissions.DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis co ...