Nissan Rogue manuals

Nissan Rogue Service Manual: Side camera finisher

Removal and Installation

The side camera finisher (if equipped) or door mirror lower finisher is serviced as part of the door mirror rear finisher. Refer to MIR-25, "Removal and Installation".

Door mirror rear finisher
Removal and Installation REMOVAL  Beginning at the top of door mirror rear finisher and working around, use a suitable tool to release the pawls and remove door mirror rear finisher. : ...

Door mirror remote control switch
Removal and Installation REMOVAL  Release pawls using a suitable tool and remove front door pull handle (LH). Refer to INT-15, "Exploded View".  Release pawls (B) using ...

Other materials:

Unbalance steering wheel turning force (torque variation)
Description Unbalance steering wheel turning force (torque variation). Diagnosis Procedure 1.PERFORM SELF-DIAGNOSIS With CONSULT  Turn the ignition switch OFF to ON.  Perform “EPS” self-diagnosis. Is any DTC detected? YES >> Check the DTC. Refer to STC-13, "DTC ...

Reporting safety defects
For USA If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying NISSAN. If NHTSA receives similar complaints, it may open an inv ...

CAN system (type 4)
MAIN LINE BETWEEN IPDM-E AND DLC CIRCUIT Diagnosis Procedure 1.CHECK CONNECTOR  Turn the ignition switch OFF.  Disconnect the battery cable from the negative terminal.  Check the following terminals and connectors for damage, bend and loose connection (connector side an ...

© 2014-2025 Copyright www.nirogue.com