Nissan Rogue Service Manual: Removal and installation

Wheel and tire

Adjustment BALANCING WHEELS (ADHESIVE WEIGHT TYPE) Preparation Before Adjustment Remove inner and outer balance weights from the wheel. Using releasing agent, remove double-faced adhesive tape f ...

Wheel and tire

Exploded View Wheel and tire  Wheel nut Removal and Installation REMOVAL  Remove wheel nuts using power tool.  Remove wheel and tire. INSTALLATION Installation ...

Other materials:

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT WITH INTELLIGENT KEY WITH INTELLIGENT KEY : Description Refer to LAN-8, "System Description". WITH INTELLIGENT KEY : DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm ...

Hood
Hood Pull the hood lock release handle 1 located below the instrument panel until the hood springs up slightly.  Locate the lever 2 in between the hood and grille and push the lever sideways with your fingertips.  Raise the hood 3 .  Remove the support rod 4 and in ...

RearView Monitor (if so equipped)
When the shift lever is shifted into the R (Reverse) position, the monitor display shows the view to the rear of the vehicle. WARNINGFailure to follow the warnings and instructions for proper use of the RearView Monitor could result in serious injury or death.  The Re ...