Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description
— (J-46534) Trim Tool Set

Removing trim components

Commercial Service Tools

Tool name

Description

Power tool

Loosening nuts, screws and bolts
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
COMPONENT PARTS Component Parts Location Center of back door View with glove box removed No Component Function 1 Rod antenna Refer to AV-232, &qu ...

Other materials:

B0093 front door satellite sensor LH
DTC Logic DTC DETECTION LOGIC With CONSULT CONSULT name DTC DTC detecting condition Repair order DOOR SATELLITE SENSOR LH [SENSOR FAIL] B0093 Front door satellite sensor LH has malfunctioned. Refer to SRC-70, "Diagnosis Procedure". ...

Power supply and ground circuit
WITH INTELLIGENT KEY SYSTEM WITH INTELLIGENT KEY SYSTEM : Diagnosis Procedure Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram". 1. CHECK FUSE Check that the following fuse is not blown. Terminal No. Signal name Fuse No. 161 BCM power sup ...

Basic inspection
CONFIGURATION (CAN GATEWAY) Work Procedure 1.WRITING MODE SELECTION CONSULT Configuration Select “Re/programming, Configuration” of CAN gateway. When writing saved data>>GO TO 2. When writing manually>>GO TO 3. 2.PERFORM “AFTER REPLACE ECU” OF “READ / WRITE CONFIGURA ...

© 2014-2025 Copyright www.nirogue.com