Nissan Rogue (T33) 2021-Present Service Manual: Rdr-Fr Branch Line Circuit

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Lan System / Can :: Dtc/circuit Diagnosis / Rdr-Fr Branch Line Circuit

Diagnosis Procedure

CHECK CONNECTOR

  1. Turn the ignition switch OFF.

  2. Disconnect the battery cable from the negative terminal.

  3. Check the terminals and connectors of the side radar front RH for damage, bend and loose connection (unit side and connector side).

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair the terminal and connector.

CHECK RIGHT/LEFT SWITCHING SIGNAL CIRCUIT

Check the right/left switching signal circuit of the side radar front RH. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair the root cause.

CHECK HARNESS FOR OPEN CIRCUIT

  1. Disconnect the connector of side radar front RH.

  2. Check the resistance between the side radar front RH harness connector terminals.

    Side radar front RH harness connector Resistance (Ω)
    Connector No. Terminal No.
    E136 1 2 Approx. 108 – 132
    8 7 Approx. 108 – 132

Is the measurement value within the specification?

YES>>

GO TO 4.

NO>>

Repair the side radar front RH branch line.

CHECK POWER SUPPLY AND GROUND CIRCUIT

Check the power supply and the ground circuit of the side radar front RH. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES (Present error)>>

Replace the side radar front RH. Refer to Removal and Installation.

YES (Past error)>>

Error was detected in the side radar front RH branch line.

NO>>

Repair the power supply and the ground circuit.

    Rdr-Fl Branch Line Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the side radar f...
    Avm Branch Line Circuit (its Can Communication 6 Circuit)
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the around view ...

    Other materials:

    Dtc/circuit Diagnosis. U2141-87 Can Comm Circuit
    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Ariya vehicle is equipped ...

    U2e52-87 Can Comm Circuit
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition U2E52 87 CAN communication error (ADAS control unit) Diagnosis condition When ignition switch is ON. Signal (terminal) CAN communication signal Threshold Not receiving from ADAS c ...

    System
    Propilot Assist 2.1 System Description SYSTEM DIAGRAM Component Description ADAS control unit 2 ADAS Control Unit GNSS antenna ROOF ANTENNA AND ANTENNA FEEDER HD map module HD MAP MODULE Front camera unit Front Camera Unit Steering assist switch Steering As ...