Nissan Rogue (T33) 2021-Present Service Manual: Icc 2 Branch Line Circuit (its Can Communication 1 Circuit)

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Lan System / Can :: Dtc/circuit Diagnosis / Icc 2 Branch Line Circuit (its Can Communication 1 Circuit)

Diagnosis Procedure

CHECK CONNECTOR

  1. Turn the ignition switch OFF.

  2. Disconnect the battery cable from the negative terminal.

  3. Check the terminals and connectors of the ADAS control unit 2 for damage, bend and loose connection (unit side and connector side).

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair the terminal and connector.

CHECK HARNESS FOR OPEN CIRCUIT

  1. Disconnect the connector of ADAS control unit 2.

  2. Check the resistance between the ADAS control unit 2 harness connector terminals.

    • Without ProPILOT Assist 2.1

      ADAS control 2 unit harness connector Resistance (Ω)
      Connector No. Terminal No.
      B4 37 17 Approx. 108 – 132

    • With ProPILOT Assist 2.1

      ADAS control 2 unit harness connector Resistance (Ω)
      Connector No. Terminal No.
      B135 10 30 Approx. 108 – 132

Is the measurement value within the specification?

YES>>

GO TO 3.

NO>>

Repair the ADAS control unit 2 branch line.

CHECK POWER SUPPLY AND GROUND CIRCUIT

Check the power supply and the ground circuit of the ADAS control unit 2. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES (Present error)>>

Replace the ADAS control unit 2. Refer to Removal and Installation.

YES (Past error)>>

Error was detected in the ADAS control unit 2 branch line.

NO>>

Repair the power supply and the ground circuit.

    Avm Branch Line Circuit (its Can Communication 1 Circuit)
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the around view ...
    Lane Branch Line Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the front camera...

    Other materials:

    C1203-86 Abs Signal
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detecting condition C1203-86 ABS SYSTEM (Antilock brake system) Diagnosis condition Ignition switch: ON Nissan Ariya Vehicle running Signal Wheel speed signals ...

    Towing load/specification
    WARNING The towing capacities in this manual are general guidelines. Actual safe towing capacity of your Nissan Rogue depends on factory or dealer-installed equipment, passenger load, and cargo weight. You must weigh both the vehicle and trailer as described to determine true towing capacity. Never ...

    Dtc/circuit Diagnosis. B0073-09 Pre-Ten Rear Lh
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B0073-09 PRE-TEN REAR LH (Second Row Left Seat Belt Pretensioner Deployment Control) Diagnosis condition When ignition switch is ON. Signal (terminal) Rear ...