Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: U1c01-08 Lin Communication

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Body Control System / Dtc/circuit Diagnosis :: U1c01-08 Lin Communication

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content) 		DTC Detection Condition
U1C01-08

LIN communication

(Local interconnect network communication) 		Diagnosis condition Ignition switch is ON or OFF (auto ACC status).
Signal (terminal) LIN communication signal
Threshold BCM detects LIN communication error.
Diagnosis delay time 1 second or less

POSSIBLE CAUSE

  • LIN communication circuit

  • Hands free sensor control unit

  • BCM

FAIL-SAFE

—

DTC CONFIRMATION PROCEDURE

CHECK SELF-DIAG RESULT

CONSULT

  1. Ignition switch ON.

  2. Select “Self diagnosis result” mode of “BCM”.

Is DTC detected?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: Inspection End.

DTC Diagnosis Procedure

CHECK HANDS FREE SENSOR CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT

Check hands free sensor control unit power supply and ground circuit. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace harness.

CHECK AUTOMATIC BACK DOOR LIN COMMUNICATION

Check automatic back door LIN communication. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

Replace hands free sensor control unit. Refer to Removal and Installation.

NO>>

Inspection End.

    Dtc/circuit Diagnosis. U1327-54 Mac Key Update
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition U1327-54 MAC key update (Message authentication code key upd...
    Dtc/circuit Diagnosis. U1c02-08 Lin Communication
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition U1C02-08 LIN communication (Local interconnect network commu...

    Other materials:

    P0460 Fuel Level Sensor
    DTC Description DTC DETECTION LOGICWhen the vehicle is parked, naturally the fuel level in the fuel tank is stable. It means that output signal of the fuel level sensor does not change. If ECM senses sloshing signal from the sensor, fuel level sensor malfunction is detected. DTC CONSULT ...

    P0079 Evt Control Solenoid Valve
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0079 00 Exhaust valve control solenoid (Exhaust Valve Control Solenoid Circuit Low Bank 1) Diagnosis condition Engine running at idle Signal (terminal) ...

    Removal and Installation. Combination Switch
    Removal and Installation REMOVALRemove steering angle sensor. Refer to Removal and Installation. Disconnect harness connector from combination switch. Remove the combination switch mounting screw . Pull out the combination switch by moving it alternately on the right and left side. CAUTIO ...