Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: B2907-31 Lift Sensor
DTC Description
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen items (Trouble diagnosis content) | DTC detection condition | |
|---|---|---|---|
| B2907-31 | Lift Sensor | Diagnosis condition | When the ignition switch is ON. |
| Signal (terminal) | Lifting Motor (terminal #5) | ||
| Threshold | Sensor signal not received | ||
| Diagnosis delay time | 100 mili- seconds or more | ||
POSSIBLE CAUSE
-
LH lifting motor
-
Driver seat control unit
-
Harness and connectors
FAIL-SAFE
Stop automatic drive position function.
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
-
Ignition switch ON and wait for 20 seconds or more.
-
Check “Self diagnosis result” mode of “DRIVER SEAT”.
Is DTC detected?
YES>>Refer to Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: Inspection End.
Diagnosis Procedure
CHECK LIFTING MOTOR SENSOR SIGNAL
-
Ignition switch OFF.
-
Disconnect driver seat control unit and LH lifting motor.
-
Check continuity between driver seat control unit harness connector and LH lifting motor harness connector.
| Driver seat control unit | LH reclining motor | Continuity | ||
|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |
| B213 | 16 | B218 | 5 | Yes |
Is the inspection result normal?
YES>>Connect driver seat control unit and LH reclining motor. Refer to Component Function Check.
NO>>Repair the harness or connector.
Other materials:
Dtc/circuit Diagnosis. B0028-1a Side A/b Module Rh
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC Detection Condition
B0028-1A
SIDE A/B MODULE RH
(Right Side Airbag Deployment Control)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
Front side air bag modu ...
Chassis control
Basic information
The chassis control system in the Nissan Rogue uses an electric control module that manages the following functions:
Intelligent Trace Control
Active Ride Control (if so equipped)
Intelligent Trace Control
This feature analyzes the driver’s steering, acceleration and braking ...
Chassis Can Communication 4 Circuit
Diagnosis Procedure
CHECK NETWORK DIAGNOSIS
Check the "Network diagnosis" results from CONSULT to see that the diagnostic CAN communication circuit have no malfunction.
Are the diagnostic CAN communication circuit normal?
YES>>
GO TO 2.
NO>>
Check and repair diagnostic CAN commu ...
