Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: B2083-23 Request Sw (fr)

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock / Dtc/circuit Diagnosis :: B2083-23 Request Sw (fr)

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content) 		DTC Detection Condition
B2083-23

Request SW (FR)

[Request switch (Front right side)] 		Diagnosis condition Ignition switch ON
Signal (terminal) Door request switch signal (Intelligent Key unit connector terminal 11)
Threshold Intelligent Key unit detects that the front door request switch RH is stuck ON
Diagnosis delay time 10 seconds or more

POSSIBLE CAUSE

  • Front door request switch RH

  • Harness or connector (front door request switch RH circuit is shorted)

  • Intelligent Key unit

FAIL-SAFE

—

DTC CONFIRMATION PROCEDURE

DTC CONFIRMATION

CONSULT

  1. Ignition switch ON and wait for 10 seconds or more.

  2. Select “Self diagnosis result” mode of “INTELLIGENT KEY”.

Is DTC detected?

YES>>

Refer to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: Inspection End.

DTC Diagnosis Procedure

CHECK DOOR REQUEST SWITCH INPUT SIGNAL

  1. Ignition switch OFF.

  2. Disconnect front door request switch RH connector.

  3. Check voltage between front door request switch RH harness connector and ground.

    (+) (–)

    Voltage

    (Approx.)
    Front door request switch RH
    Connector Terminal
    D116 1 Ground Battery voltage

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

GO TO 2.

CHECK DOOR REQUEST SWITCH CIRCUIT

  1. Disconnect Intelligent Key unit connector.

  2. Check continuity between front door request switch RH harness connector and Intelligent Key unit harness connector.

    Front door request switch RH Intelligent Key unit Continuity
    Connector Terminal Connector Terminal
    D116 1 M184 11 Yes

  3. Check continuity between front door request switch RH harness connector and ground.

    Front door request switch RH — Continuity
    Connector Terminal
    D116 1 Ground No

Is the inspection result normal?

YES>>

Replace Intelligent Key unit. Refer to Removal and Installation.

NO>>

Repair or replace harness.

CHECK DOOR REQUEST SWITCH GROUND CIRCUIT

Check continuity between front door request switch RH harness connector and ground.

Front door request switch RH — Continuity
Connector Terminal
D116 2 Ground Yes

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace harness.

CHECK DOOR REQUEST SWITCH

Refer to Component Inspection.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Replace front door outside handle. Refer to Removal and Installation.

CHECK INTERMITTENT INCIDENT

Refer to Intermittent Incident.

>>

Inspection End.

    Dtc/circuit Diagnosis. B2081-23 Request Sw (fl)
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B2081-23 Request SW (FL) [Request switch (front left side)] ...
    Dtc/circuit Diagnosis. B2086-23: Request Sw (bd/tr)
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B2086-23 Request SW (BD/TR) [Request switch (back door/trunk...

    Other materials:

    Main Line Between Lib 12v and M&a Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damage, bend and loose connection (connector side and harness side). Harness connector B41 Harness con ...

    Dtc/circuit Diagnosis. B0038-11 Rear Side A/b Module Rh
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B0038-11 REAR SIDE A/B MODULE RH (Second Row Right Side Airbag Deployment Control) Diagnosis condition When ignition switch is ON. Signal (terminal) Rear si ...

    P0106 Manifold Absolute Pressure Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0106 00 ABSL PRES SEN/CIRC (Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Range/Performance) Diagnosis condition — Signal (terminal) ...