Nissan Rogue (T33) 2021-Present Service Manual: Ccm Branch Line Circuit (its Can Communication 6 Circuit)
Diagnosis Procedure
CHECK CONNECTOR
-
Ignition switch OFF.
-
Disconnect the battery cable from the negative terminal.
-
Check the terminals and connectors of the chassis control module for damage, bend and loose connection (unit side and connector side).
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair the terminal and connector.
CHECK HARNESS FOR OPEN CIRCUIT
-
Disconnect the connector of chassis control module.
-
Check the resistance between the chassis control module harness connector terminals.
Chassis control module harness connector Resistance (Ω) Connector No. Terminal No. M32 12 28 Approx. 54 – 66
Is the measurement value within the specification?
YES>>GO TO 3.
NO>>Repair the chassis control module branch line.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check the power supply and the ground circuit of the chassis control module. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Present error: Replace the chassis control module. Refer to Removal and Installation.
YES>>Past error: Error was detected in the chassis control module branch line.
NO>>Repair the power supply and the ground circuit.
Other materials:
C1f76-49 Steering Angle Sensor
Without Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
C1F76
49
Steering angle sensor
(Steering angle sensor)
Diagnosis condition
When engine is running
When AEB system is ...
Dtc/circuit Diagnosis. B100e-1a Knee Air Bag Module Rh
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC Detection Condition
B100E-1A
Knee air bag module RH
(Knee air bag module right hand)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
Knee air bag module RH si ...
B24a1-16 A/c Auto Amp. Power Supply
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
B24A1-16
A/C AUTO AMP. POWER SUPPLY
(Air conditioning automatic amplifier power supply)
Diagnosis condition
Ignition switch ON
Signal (Terminal)
Accessory p ...
