Nissan Rogue (T33) 2021-Present Service Manual: C1f44-83 Bcm
Without Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F44 | 83 |
BCM (Body control module) |
Diagnosis condition | When AEB system is ON |
| Signal (terminal) | — | |||
| Threshold | If BCM is malfunctioning | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
BCM
-
ADAS control unit 2
FAIL-SAFE
The following systems are canceled.
-
Vehicle-to-vehicle distance control mode
-
Conventional (fixed speed) cruise control mode
-
Steering wheel assistance function
-
AEB
-
RAB
-
I-DA
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F44-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Turn the AEB system ON.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F44-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F44-83” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
With Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F44 | 83 |
BCM (Body control module) |
Diagnosis condition |
|
| Signal (terminal) | — | |||
| Threshold | If ADAS control unit 2 detects an error signal that is received from BCM via CAN communication | |||
| Diagnosis delay time | 4 seconds or more | |||
POSSIBLE CAUSE
-
BCM
-
ADAS control unit 2
FAIL-SAFE
The following systems are canceled.
-
Vehicle speed & vehicle-to-vehicle control function
-
Lane keep function*1
-
Lane keep function*2
-
Lane change support function
-
Overtaking support function
-
Route driving support function
-
FEB
-
RAB
-
PFCW
-
LDP
-
Blind Spot Intervention
-
TSR
-
DAA
-
*1: ProPILOT Assist 2.1 display is green
-
*2: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F44-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine .
-
Turn the FEB system ON and wait at least 4 seconds.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F44-83” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F44-83” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F44-83” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2 .
PERFORM SELF-DIAGNOSIS OF BCM
Check if any DTC is detected in “Self Diagnostic Result” of “BCM”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
Other materials:
C1f76-49 Steering Angle Sensor
Without Propilot Assist 2.1
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
C1F76
49
Steering angle sensor
(Steering angle sensor)
Diagnosis condition
When engine is running
When AEB system is ...
Front Wheel Hub and Knuckle
Exploded View
Steering knuckle
Splash guard
Hub bolt
Wheel hub and bearing assembly
Disc rotor
Wheel hub lock nut
: Comply with the installation procedure when tightening. Refer to Removal and Installation.
: N·m (kg-m, ft-lb)
: Always replace aft ...
P00d2 Ho2s2 Heater
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P00D2
00
Heated O2 sensor heater B1 sensor 2
(HO2S heater control circuit range/performance bank 1 sensor 2)
Diagnosis condition
—
Signal (terminal)
...
