Nissan Rogue (T33) 2021-Present Service Manual: B272b-97 Center Sensor [fr]
DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen items (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| B272B-97 |
CENTER SENSOR [FR] (Center sensor [FR]) |
Diagnosis condition | When ignition switch is ON | |
| Signal (terminal) | — | |||
| Threshold | The sonar sensor is covered with ice or mud | |||
| Diagnosis delay time | 4 seconds or more | |||
POSSIBLE CAUSE
-
The sonar sensor is covered with ice or mud
-
Front sonar sensor RH inner
FAIL-SAFE
Stop the obstacle detection function
CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
-
Turn ignition switch ON.
-
Turn ignition switch OFF and wait at least 30 seconds.
-
Turn ignition switch ON and wait at least 30 seconds or more.
-
Select “Self Diagnostic Result” mode of “SONAR” using CONSULT.
-
Check the DTC.
Is DTC “B272B–97” detected?
YES>>Refer to Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
Diagnosis Procedure
CHECK SONAR SENSOR
Make sure the sonar sensor is not covered with snow or mud.
Is the sonar sensor covered with ice or mud?
YES>>Clean the sonar sensor.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With CONSULT
-
Turn ignition switch ON.
-
Erase DTC.
-
Perform DTC confirmation procedure again. Refer to DTC Description.
Is DTC B272B-97 detected again?
YES>>Replace the front sonar sensor RH inner. Refer to Removal and Installation.
NO>>INSPECTION END
Other materials:
C106e-54 Steering Angle Sensor
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
C106E
54
Steering angle sensor
(Steering angle sensor)
Diagnosis condition
When ignition switch is ON.
When the power supply voltage is normal.
...
U224a-87 Can Comm Err (awd/4wd)
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
U224A
87
CAN comm err (AWD/4WD)
[Controller area network communication error (AWD/4WD control unit)]
1
Diagnosis condition
When ignition switch is ON.
...
U2648-87 Can Comm Circuit
DTC Description
CAN COMMUNICATIONCAN (Controller Area Network) is a serial
communication line for real time applications. It is an on-Nissan Ariya
vehicle multiplex communication line with high data communication speed
and excellent error detection ability. Modern Nissan Ariya vehicle is
eq ...