Nissan Rogue Owners Manual: Vehicle loading information

Nissan Rogue Owners Manual / Technical and consumer information / Vehicle loading information

WARNING

It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Be sure everyone in your vehicle is in a seat and using a seat belt properly.

Installing front license plate

Installing front license plate Use the following steps to mount the front license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag: ...

Terms

It is important to familiarize yourself with the following terms before loading your vehicle: Curb Weight (actual weight of your vehicle) - vehicle weight including: standard and optio ...

Other materials:

Removal and installation
NATS ANTENNA AMP. Removal and Installation REMOVAL Remove the steering column covers. Refer to IP-17, "Removal and Installation". Disconnect the harness connector from the NATS antenna amp. Release pawls and remove NATS antenna amp. (1) from the ignition sw ...

P0197, P0198 EOT sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0197 EOT SEN/CIRC (Engine oil temperature sensor low) An excessively low voltage from the engine oil temperature sensor is sent to ECM. ...

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description Refer to LAN-8, "System Description". DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms and a present DTC by p ...