Nissan Rogue manuals

Nissan Rogue Service Manual: Sunshade motor assembly

Reference Value

TERMINAL LAYOUT

Terminal layout

PHYSICAL VALUES

Physical values

Moonroof motor assembly
Reference Value TERMINAL LAYOUT PHYSICAL VALUES ...

Wiring diagram
MOONROOF SYSTEM Wiring Diagram ...

Other materials:

System
System Description When the vehicle has reached a speed of 40 km/h (25 MPH) or greater, the BCM receives a signal transmitted from the tire pressure sensors installed in each wheel. If the BCM detects low inflation pressure or a system malfunction, it sends a signal to the combination meter v ...

Key switch signal circuit (without intelligent key)
Description Transmits a key switch signal to the BCM. Component Function Check 1. CHECK BCM INPUT SIGNAL Select "Data Monitor" for "BCM" and check the "KEY ON SW" monitor value. Is the inspection result normal? YES >> Inspection End. NO >> Refer ...

P0967 pressure control solenoid B
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0967 PC SOLENOID B (Pressure Control Solenoid B Control Circuit High) When all of the following conditions are satisfied and this state is main ...

В© 2014-2019 Copyright www.nirogue.com