Nissan Rogue Service Manual: Restraints

Removal and installation

EPS CONTROL UNIT Removal and Installation CAUTION: Disconnect the battery negative terminal before removing the EPS control unit. The EPS control unit is an integral part of the steering column. I ...

Seat Belt

...

Other materials:

C1735 ignition signal
DTC Logic NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

Instrument panel
Vent  Headlight/fog light (if so equipped)/turn signal switch  Meters, gauges, warning/indicator lights and Vehicle Information Display  Windshield wiper/washer switch and rear window wiper/washer switch  /Ignition switch (if so equipped)  Push-button ...

EPS warning lamp
Component Function Check 1.CHECK THE ILLUMINATION OF THE EPS WARNING LAMP Check that the EPS warning lamp turns ON when ignition switch turns ON. Then, EPS warning lamp turns OFF after the engine is started. Is the inspection result normal? YES >> Inspection End. NO >> Perfor ...