Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description
— (J-50190) Signal Tech II

  • Activate and display TPMS transmitter IDs
  •  Display tire pressure reported by the TPMS transmitter
  •  Read TPMS DTCs
  •  Register TPMS transmitter IDs
  •  Test remote keyless entry keyfob relative signal strength
  •  Check Intelligent Key relative signal strength
  •  Confirm vehicle Intelligent Key antenna signal strength
  •  Compatible with future sensors
  •  Equipped with a display
KV48105501 (J-45295-A) Transmitter activation tool

  • Activate TPMS transmitter IDs
  •  Compatible with future sensors
  •  Equipped with a display (KV48105501 only)

Commercial Service Tool

Tool name

Description

Power tool

Loosening nuts, screws and bolts
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
...

Other materials:

P0890 TCM
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0890 TCM (Transmission Control Module Power Relay Sense Circuit Low) When all of the following conditions are satisfied and this state is maint ...

Diagnosis system [ABS actuator and electric unit (control unit)]
CONSULT Function APPLICATION ITEMS CONSULT can display each diagnostic item using the diagnostic test modes as follows. Mode Function description ECU identification Parts number of ABS actuator and electric unit (control unit) can be read. Self Diagnos ...

C1160 DECEL G SEN SET
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1160 DECEL G SEN SET When calibration of yaw rate/side/decel G sensor is not complete. Yaw rate/side/decel G sensor  Harness or connector   ...

© 2014-2020 Copyright www.nirogue.com