Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description

— (J-46534) Trim Tool Set

Removing trim components

Commercial Service Tools

Tool name

Description

Power tool

Loosening nuts, screws and bolts
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
COMPONENT PARTS Component Parts Location Center of back door No. Component Function 1 Rod antenna Refer to AV-14, "Rod Antenna, Antenna Amp., S ...

Other materials:

Differential side oil seal
Exploded View Transaxle assembly Differential side oil seal (left side) Differential side oil seal (right side) (FWD models only) : Always replace after every disassembly. : Apply CVT fluid Removal and Installation REMOVAL NOTE: When removing components such as hoses, tubes ...

Ambient sensor signal circuit
Description It detects outside air temperature and converts it into a resistance value which is then input into the combination meter. Diagnosis Procedure Regarding Wiring Diagram information, refer to MWI-32, "Wiring Diagram". 1.CHECK AMBIENT SENSOR SIGNAL CIRCUIT  Turn ig ...

C1716, C1717, C1718, C1719 transmitter (pressure data)
DTC Logic NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

© 2014-2019 Copyright www.nirogue.com