Nissan Rogue manuals

Nissan Rogue Service Manual: ECU diagnosis information

BCM

List of ECU Reference

List of ECU Reference

System description
COMPONENT PARTS Component Parts Location No. Component Description 1 Push-button ignition switch1 Push-button ignition switch (push switch) is pressed ...

Wiring diagram
POWER DISTRIBUTION SYSTEM Wiring Diagram ...

Other materials:

C1769 configuration setting
DTC Description This procedure must be performed:  After replacement of BCM. DTC DETECTION LOGIC DTC Display Item Malfunction detected condition C1769 CONFIG SETTING (Configuration setting) Tire air pressure monitoring system configuration cannot be p ...

Periodic maintenance
REAR DIFFERENTIAL GEAR OIL Inspection OIL LEAKS Make sure that oil is not leaking from final drive assembly or around it. OIL LEVEL  Remove filler plug (1) and check oil level from filler plug mounting hole as shown. CAUTION: Do not start engine while checking oil level. &nbs ...

Sunshade system does not operate properly
Diagnosis Procedure 1.CHECK BCM POWER SUPPLY AND GROUND CIRCUIT Check BCM power supply and ground circuit. Refer to BCS-68, "Diagnosis Procedure" (with Intelligent Key System), BCS-128, "Diagnosis Procedure" (without Intelligent Key System). Is the inspection result no ...

В© 2014-2021 Copyright www.nirogue.com