Nissan Rogue manuals

Nissan Rogue Owners Manual: Chassis Control

The chassis control is an electric control module that includes the following functions:

Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following functions ...

Active trace control
This system senses driving based on the driver’s steering and acceleration/braking patterns, and controls brake pressure at individual wheels to aid tracing at corners and help smooth vehicle re ...

Other materials:

P0500 VSS
Description ECM receives vehicle speed signals from two different paths via CAN communication line: One is from the ABS actuator and electric unit (control unit) via the combination unit and the other is from TCM. DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms ...

U1000 CAN COMM CIRCUIT
Description CAN communication allows a high rate of information transmission through the two communication lines (CAN-H line and CAN-L line) connecting various control units in the system. Each control unit transmits/ receives data but selectively reads required data only. DTC Logic DTC DET ...

Parking brake front cable
Removal and Installation REMOVAL  Remove the instrument lower panel LH. Refer to IP-22, "Removal and Installation".  Remove driver seat (LH). Refer to SE-32, "DRIVER SIDE : Removal and Installation"  Remove the center console. Refer to IP-18, "R ...

© 2014-2018 Copyright www.nirogue.com