Nissan Rogue Service Manual: Preparation

Nissan Rogue Service Manual / Ventilation, heater & air conditioner / Heater & Air Conditioning System / Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name		Description
— (J-41425-NIS) Aluminum tube repair kit		Repairing leaks in A/C tube
— (J-38873-A) Drive plate installer		Installing pulley

Commercial Service Tool

(TechMate No.) Tool name		Description
(J-41810-NI) Refrigerant identifier equipment (R- 134a)		For checking refrigerant purity and system contamination
( — ) Power Tool		Loosening nuts, screws and bolts
— (J-48710) NISSAN ACR2009 RRR Unit		Refrigerant recovery, recycling and recharging
— (J-41995) Electronic refrigerant leak detector		Power supply: DC 12V (battery terminal)
— (J-43926) Refrigerant dye leak detection kit Kit includes: (J-42220) UV lamp and UV safety goggles (J-41459) Refrigerant dye injector (J-41447) Fluorescent leak detection dye (box of 24, 1/4 ounce bottles) (J-43872) Refrigerant dye cleaner		Power supply: DC 12V (battery terminal)
— (J-39183-C) Manifold Gauge Set (with hoses and couplers)		Identification: The gauge face indicates R-134a. Fitting size-Thread size 1/2”-16 ACME
Service Hoses: High side hose (J-39500-72B) Low side hose (J-39500-72R) Utility hose (J-39500-72Y)		Hose color: Low side hose: Blue with black stripe High side hose: Red with black stripe Utility hose: Yellow with black stripe or green with black stripe Hose fitting to gauge: 1/2”-16 ACME
Service couplers High side coupler (J-39500-20A) Low side coupler (J-39500-24A)		Hose fitting to service hose: M14 x 1.5 fitting is optional or permanently attached.
— (J-39699) Refrigerant Weight Scale		For measuring of refrigerant Fitting size-Thread size 1/2”-16 ACME
— (J-39649) Vacuum Pump (Including the isolator valve)		Capacity: Air displacement: 4 CFM Micron rating: 20 microns Oil capacity: 482 g (17 oz) Fitting size-Thread size 1/2”-16 ACME
— (J-46534) Trim Tool Set		Removing trim components

Sealant and/or Oil

Tool number (TechMate No.) Tool name		Description
— ( — ) HFC-134a (R-134a) Refrigerant		Container color: Light blue Container marking: HFC-134a (R- 134a) Fitting size: Thread size large container 1/2”-16 ACME
— ( — ) ND-OIL 8		Type: Nippon Denso Oil 8 (ND-OIL 8) Application: HFC-134a (R-134a)

Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

Other materials:

DTC/circuit diagnosis
POWER SUPPLY AND GROUND CIRCUIT BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram". 1. CHECK FUSE Check that the following fuse i ...

System description
COMPONENT PARTS Component Parts Location IPDM E/R Engine compartment (LH) SYSTEM RELAY CONTROL SYSTEM RELAY CONTROL SYSTEM : System Description SYSTEM DIAGRAM DESCRIPTION IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to t ...

Changing wheels and tires
Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km). Refer to “Flat tire” in the “In case of emergency” section in this manual for tire replacing procedures. As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. ...