Nissan Rogue Service Manual: Preparation
Special Service Tool
The actual shape of the tool may differ from those illustrated here.
|
Tool number (TechMate No.) Tool name |
Description |
|
| KV991J0080 (J-45741) ABS active wheel sensor tester |
|
Checking operation of ABS active wheel sensors |
Commercial Service Tools
| Tool name | Description | |
| 1. Flare nut crowfoot 2. Torque wrench |
|
Removing and installing brake piping a: 10 mm (0.39 in)/12 mm (0.47 in) |
| Power tool |
|
Loosening nuts, screws and bolts |
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...
Other materials:
Circuit inspection
DESCRIPTION
In general, testing electrical circuits is an easy task if it is
approached in a logical and organized method.
Before beginning it is important to have all available information on the
system to be tested. Also, get a thorough
understanding of system operation. Then y ...
Instrument lower panel LH
Removal and Installation
REMOVAL
Release instrument side finisher (LH) (1) pawls using a suitable
tool and remove.
: Pawl
Remove bolts (A) and fuel filler lid/hood lock release handle (1)
from instrument lower panel LH.
Remove data link cover from the instrument lowe ...
Fusible link inspection
How To Check
A melted fusible link can be detected either by visual inspection or by
feeling with finger tip. If its condition is
questionable, use circuit tester or test lamp.
Fusible link
With stop/start system
Without stop/start system*
*: Not applicable
CAUTION:
If ...
