Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description

— (165-GR8-1200KIT-NI) Multitasking battery and electrical diagnostic station

Testing batteries, starting and charging systems and charges batteries.

For operating instructions, refer to diagnostic station instruction manual.

— (165-EXP-800 NI) Battery and electrical diagnostic analyzer

Testing batteries and charging systems.

For operating instructions, refer to diagnostic analyzer instruction manual.

Commercial Service Tool

Tool name

Description

Power tool

Loosening nuts, screws and bolts
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

DTC/circuit diagnosis
...

Other materials:

Wheel and tire
Exploded View Wheel and tire  Wheel nut Removal and Installation REMOVAL  Remove wheel nuts using power tool.  Remove wheel and tire. INSTALLATION Installation is in the reverse order of removal. CAUTION:  When installing wheel nuts, tighten them dia ...

How to erase permanent DTC
Description OUTLINE When a DTC is stored in ECM When a DTC is stored in ECM and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the driving pattern for MIL shutoff three times in a raw. *1: When the same malfunction is detecte ...

Compression pressure
CHECKING COMPRESSION PRESSURE  Warm up the engine to full operating temperature.  Release the fuel pressure. Refer to EC-144, "Work Procedure".  Remove the ignition coil and spark plug from each cylinder. Refer to EM-36, "Removal and Installation" and ...

© 2014-2025 Copyright www.nirogue.com