Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: U2141-87 Can Comm Err (tcm)
DTC Description
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Ariya vehicle is equipped with many electronic control unit, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H-line, CAN L-line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart. Refer to CAN Communication Signal Chart.
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen items (Trouble diagnosis content) | DTC Detection Condition | |
|---|---|---|---|
| U2141-87 |
CAN comm err (TCM) [Controller area network communication error (Transmission control module)] |
Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | CAN communication signal | ||
| Threshold | Air bag diagnosis sensor unit cannot communicate CAN communication signal. | ||
| Diagnosis delay time | 2 seconds or more. | ||
POSSIBLE CAUSE
CAN communication system
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
CHECK SELF DIAGNOSIS RESULT
CONSULT
-
Ignition switch ON and wait for 2 seconds or more.
-
Perform “Self diagnosis result” mode of “AIR BAG” using CONSULT.
Is malfunctioning part detected?
YES>>Refer to Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: Inspection End
Diagnosis Procedure
CHECK CAN COMMUNICATION SYSTEM
Check CAN communication system. Refer to Trouble Diagnosis Flow Chart.
>>
Inspection End
Other materials:
C106e-54 Steering Angle Sensor
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
C106E
54
Steering angle sensor
(Steering angle sensor)
Diagnosis condition
When ignition switch is ON.
When the power supply voltage is normal.
...
Periodic Maintenance
Periodic Maintenance
The following tables show the normal maintenance schedule. Depending
upon weather and atmospheric conditions, varying road surfaces,
individual driving habits and Nissan Ariya vehicle usage, additional or
more frequent maintenance may be required.Periodic maintenance beyo ...
Dtc/circuit Diagnosis. B1029-09 Front Seat Belt Pre-Tensioner Lh
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC Detection Condition
B1029-09
Front seat belt pre-tensioner LH
(Front seat belt pre-tensioner left hand)
Diagnosis condition
When ignition switch is ON.
Signal (terminal)
Front ...
