Nissan Rogue Service Manual: Unit disassembly and assembly

Rear disc brake

BRAKE PAD BRAKE PAD : Exploded View Sliding pin bolt Sliding pin bushing Cylinder body Inner shim cover Inner shim Inner pad Pad retainer Torque member Outer pad Outer ...

Front disc brake

BRAKE CALIPER ASSEMBLY (1 PISTON TYPE) BRAKE CALIPER ASSEMBLY (1 PISTON TYPE) : Exploded View Torque member Bushing Piston boot  Slide pin boot Slide pin  Piston &nb ...

Other materials:

CAN system (type 8)
MAIN LINE BETWEEN IPDM-E AND DLC CIRCUIT Diagnosis Procedure 1.CHECK CONNECTOR  Turn the ignition switch OFF.  Disconnect the battery cable from the negative terminal.  Check the following terminals and connectors for damage, bend and loose connection (connector side an ...

Sensor maintenance
Sensor maintenance The distance sensor for the FCW system A is located behind the front bumper. To keep the FCW system operating properly, be sure to observe the following:  Always keep the sensor area of the front bumper clean.  Do not strike or damage the areas around ...

NISSAN Intelligent Key® (if so equipped)
Replace the battery in the Intelligent Key as follows:  Remove the mechanical key from the Intelligent Key. Insert a small screwdriver A into the slit B of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing.  Replace th ...