Nissan Rogue Service Manual: Wiring diagram

ECU diagnosis information

BCM Reference Value NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate ...

Basic inspection

INSPECTION AND ADJUSTMENT ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description BEFORE REPLACEMENT When replacing BCM, save or pri ...

Other materials:

Parking brake switch
Component Function Check 1.CHECK PARKING BRAKE SWITCH OPERATION Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated. Is the inspection result normal? YES >> Inspection End. NO >> Proceed to BRC-115, "Diagnosis Procedure". D ...

C1113, C1145, C1146 yaw rate/side/decel G sensor
DTC Display Item Malfunction detected condition Possible causes C1113 G SENSOR When a malfunction is detected in longitudinal G sensor signal. Harness or connector  Yaw rate/side/decel G sensor • ABS actuator and electric unit (control ...

Operating range
Operating range The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch 1 . When the Intelligent Key battery is discharged or strong radio waves are present near the operating location, the Intelligent Key op ...