Nissan Rogue Service Manual: Wiring diagram

Preparation

Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description — (J-39570) Chass ...

Power seat for driver side

Wiring Diagram ...

Other materials:

Stall test
Work Procedure INSPECTION  Check the engine oil level. Replenish if necessary. Refer to LU-7, "Inspection".  Check for leak of the CVT fluid. Refer to TM-190, "Inspection".  Drive for about 10 minutes to warm up the vehicle so that the CVT fluid temp ...

Washer level switch signal circuit
Description Transmits the washer fluid level switch signal to the combination meter. Diagnosis Procedure Regarding Wiring Diagram information, refer to MWI-32, "Wiring Diagram". 1.CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT  Turn ignition switch OFF.  Disconnect comb ...

ECU diagnosis information
A/C AUTO AMP. Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES DTC Inspection Priority Chart If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart. Priority Det ...