Nissan Rogue manuals

Nissan Rogue Service Manual: Wind deflector

Removal and Installation

REMOVAL

  1.  Remove headlining Refer to INT-30, "Removal and Installation".
  2.  Open the glass lid to view the wind deflector.
  3.  Use suitable tool (A) release pawl on LH/RH side of wind deflector.

    : Pawl

Removal

  1. Release wind deflector retainer (1) from moonroof unit (2).

Removal

  1. Remove screws (A) on both LH/RH sides of wind deflector.

Removal

INSTALLATION

Installation is in the reverse order of removal.

Sunshade motor assembly
Removal and Installation REMOVAL  Remove the headlining. Refer to. INT-30, "Removal and Installation".  Disconnect the harness connector (A) from the sunshade motor assemb ...

Moonroof switch
Removal and Installation REMOVAL  Remove map lamp assembly. Refer to INL-55, "Removal and Installation".  Using a suitable tool release clip from harness connector. : Cl ...

Other materials:

P0746 pressure control solenoid A
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0746 PC SOLENOID A (Pressure Control Solenoid A Performance/ Stuck Off) The detecting condition A or detection condition B is detected twice or ...

Brake pedal
Inspection BRAKE PEDAL HEIGHT Check the brake pedal height (H) between the dash lower panel (3) and the brake pedal upper surface. CAUTION: Check the brake pedal height with the floor trim removed. Brake pedal height (H) from dash lower panel (3) Refer to BR-54, "Brake Peda ...

Structure and operation
TRANSAXLE TRANSAXLE : Cross-Sectional View Converter housing Oil pump Planetary gear Control valve Oil pan Steel belt Primary pulley Secondary pulley Side cover Transaxle case Differential case Final gear Reduction gear Idler gear Output gear Drive sp ...

В© 2014-2022 Copyright www.nirogue.com