Nissan Rogue manuals

Nissan Rogue Service Manual: Wheel

Inspection

WHEEL

  1.  Check tires for wear and improper inflation.
  2. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout.
  1.  Remove tire from wheel and mount wheel on a balancer machine.
  2.  Set dial indicator as shown.
  3.  Check runout, if runout value exceeds the limit, replace wheel.

Inspection

Limit
Axial Runout (A) Refer to WT-65, "Wheel".
Radial Runout (B) Refer to WT-65, "Wheel".

Periodic maintenance
...

Wheel and tire
Adjustment BALANCING WHEELS (ADHESIVE WEIGHT TYPE) Preparation Before Adjustment Remove inner and outer balance weights from the wheel. Using releasing agent, remove double-faced adhesive tape f ...

Other materials:

Roof rack
Exploded View Roof rack rear bolt cover Roof rack front bolt cover Roof rack  Roof side molding  Back door hinge cover Metal Clip Pawl Removal and Installation REMOVAL  Release pawls and remove roof rack front and rear cover (1) using suitable tool (A ...

P2813 select solenoid
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2813 SELECT SOLENOID (Select solenoid) When any of 1, or 2 is satisfied:  When all the following conditions are established three times ...

C1199 brake booster
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1199 BRAKE BOOSTER When brake booster vacuum is approx. 0 kPa (0 mm- Hg) during engine running. Harness or connector  Vacuum sensor (brake booster) ...

В© 2014-2024 Copyright www.nirogue.com