Nissan Rogue manuals

Nissan Rogue Service Manual: Washer switch

Description

Description

Component Inspection

1. CHECK FRONT WASHER SWITCH

  1.  Turn the ignition switch OFF.
  2.  Disconnect combination switch (wiper and washer switch).
  3.  Check continuity between the combination switch (wiper and washer switch) terminals.

Check front washer switch

Is the inspection result normal? YES >> GO TO 2.

NO >> Replace combination switch (wiper and washer switch). Refer to BCS-76, "Removal and Installation" (with Intelligent Key system) or BCS-136, "Removal and Installation" (without Intelligent Key system).

2. CHECK REAR WASHER SWITCH

  1.  Check continuity between the combination switch (wiper and washer switch) terminals.

Check rear washer switch

Is the inspection result normal? YES >> Wiper and washer switch is normal.

NO >> Replace combination switch (wiper and washer switch). Refer to BCS-76, "Removal and Installation" (with Intelligent Key system) or BCS-136, "Removal and Installation" (without Intelligent Key system).

Washer motor circuit
Diagnosis Procedure Regarding Wiring Diagram information, refer to WW-22, "Wiring Diagram". 1. CHECK FRONT AND REAR WASHER MOTOR FUSE  Turn the ignition switch OFF.  Check ...

Rear wiper motor circuit
Component Function Check 1. CHECK REAR WIPER ON OPERATION CONSULT ACTIVE TEST  Select "RR WIPER" of BCM active test item.  While operating the test item, check rear wiper ...

Other materials:

Quarter window glass
Exploded View Quarter window glass Quarter window glass molding Body side outer  7.0 mm (0.28 in) 12.0 (0.47 in) Adhesive Clip Removal and Installation REMOVAL  Remove the luggage side upper finisher. Refer to INT-36, "LUGGAGE SIDE UPPER FINISHER : ...

Maintenance precautions
When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precautions which should be closely observed. WARNING  Park the vehicle on a level surface, a ...

Additional service when replacing TCM and transaxle assembly
Description When replacing TCM and transaxle assembly simultaneously, perform the following work. TCM PROGRAMMING  Since vehicle specifications are not yet written in a new TCM, it is necessary to write them with CONSULT. CAUTION: When replacing TCM, save TCM data on CONSULT be ...

В© 2014-2024 Copyright www.nirogue.com