Voice commands can be used to operate the Bluetooth® Hands-Free Phone System. Press the button and say “Phone” to bring up the phone command menu. The available options are:
“Call”
For additional information on the “Call” command, refer to “Making a call” in this section.
“Phonebook” The following commands are available under
“Phonebook”:
Once the correct phonebook entry is identified, say “Dial” to dial the number or “Send Text” to send a text message to that number.
Say “Record Name” to record a name for the phonebook entry. Say “Delete Recording” to delete a recorded name for the phonebook entry.
“Recent Calls”
The following commands are available under “Recent Calls”:
Say “Dial” to call the number or “Send Text” to send a text message to that number. Say “Next Entry” or “Previous Entry” to move through the list of incoming calls.
Say “Dial” to call the number or “Send Text” to send a text message to that number. Say “Next Entry” or “Previous Entry” to move through the list of missed calls.
Say “Dial” to call the number or “Send Text” to send a text message to that number. Say “Next Entry” or “Previous Entry” to move through the list of outgoing calls.
“Messaging”
Speak this command to access text messaging functions. For additional information on these commands, refer to “Text messaging” in this section.
“Show Applications”
Speak this command to display list of smartphone apps available.
NOTE: Compatible smartphone and registration necessary to access applications. For additional information, refer to “Nissan- ConnectSM with Mobile Apps” in this section.
“Select Phone or Device”
Speak this command to select a phone to use from a list of those phones connected to the vehicle.
ECU diagnosis information
BCM
Reference Value
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS sensor
Read T ...
P0182, P0183 FTT sensor
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P0182
FTT SEN/CIRCUIT
(Fuel temperature sensor ″A″ circuit low)
An excessively low voltage from the sensor is sent to ECM.
P01 ...
The oil pressure warning continues displaying, or does
not display
Description
The low oil pressure warning message stays on when oil pressure is
normal.
The low oil pressure warning message stays off when oil pressure
is low.
Diagnosis Procedure
1.CHECK COMBINATION METER INPUT
Start the engine and select “METER/M&A” on CONSU ...