Nissan Rogue manuals

Nissan Rogue Owners Manual: Vehicle phonebook

To access the vehicle phonebook:

  1.  Press the button on the control panel.
  2.  Touch the “Phonebook” key.
  3.  Choose the desired entry from the displayed list.
  4.  The number of the entry will be displayed on the screen. Touch the number to initiate dialing.

NOTE: To scroll quickly through the list, touch the “A-Z” key in the upper right corner of the screen. Turn the TUNE/SCROLL knob to choose a letter or number and then press ENTER. The list will move to the first entry that begins with that number or letter.

Making a call

To make a call, follow the procedure below:

  1.  Press the button on the control panel.

    The “Phone” screen will appear on the display.

  2.  Select one of the following options to make a call:

Receiving a call

When a call is placed to the connected phone, the display will change to phone mode.

To accept the incoming call, either:

To reject the incoming call, either:

During a call

While a call is active, the following options are available on the screen:

Ending a call

To end a phone call, select the red phone ( ) icon on the screen or press the button on the steering wheel.

Connecting Procedure
Connecting Procedure NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. & ...

Text messaging
WARNING  Laws in some jurisdictions may restrict the use of “Text-to-Speech”. Check local regulations before using this feature.  Laws in some jurisdictions may re ...

Other materials:

C1160 DECEL G SEN SET
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1160 DECEL G SEN SET When calibration of yaw rate/side/decel G sensor is not complete. Yaw rate/side/decel G sensor  Harness or connector   ...

Refrigerant pressure sensor
Component Function Check 1.CHECK REFRIGERANT PRESSURE SENSOR FUNCTION  Start engine and warm it up to normal operating temperature.  Turn A/C switch and blower fan switch ON.  Check the voltage between ECM harness connector terminals under the following conditions. ...

Component parts
Component Parts Location Instrument panel  View with drivers door finisher removed View with center console removed  View with the lower B-pillar trim removed  View with the lower B-pillar trim removed  View with LH rear lower luggage finisher remove ...

© 2014-2024 Copyright www.nirogue.com