Nissan Rogue Service Manual: Vehicle jerks during
Description
The vehicle jerks when VDC function, TCS function, ABS function, EBD function, Brake limited slip differential (BLSD) function, Brake assist function, hill start assist function or Brake force distribution function operates.
Diagnosis Procedure
1.CHECK SYMPTOM
Check that the vehicle jerks when VDC function, TCS function, ABS function, EBD function, Brake limited slip differential (BLSD) function, Brake assist function, hill start assist function or Brake force distribution function operates.
Is the inspection result normal? YES >> Normal NO >> GO TO 2.
2.PERFORM THE SELF-DIAGNOSIS
With CONSULT
- Turn the ignition switch OFF → ON.
CAUTION:
- Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
- Start the engine.
- Repeat step 1 two or more times.
- Perform self-diagnosis for “ABS”.
Is any DTC detected? YES >> Check the DTC. Refer to BRC-55, "DTC Index".
NO >> GO TO 3.
3.CHECK CONNECTOR
With CONSULT
- Turn the ignition switch OFF.
- Disconnect ABS actuator and electric unit (control unit) harness connector.
- Check connector terminal for deformation, disconnection and looseness.
Is the inspection result normal? YES >> GO TO 4.
NO >> Poor connection of connector terminal. Repair or replace connector terminal.
4.PERFORM THE SELF-DIAGNOSIS
With CONSULT
- Connect harness connector.
- Turn the ignition switch OFF → ON.
CAUTION:
- Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
- Start the engine.
- Repeat step 2 two or more times.
- Perform self-diagnosis for “ABS”.
Is any DTC detected? YES >> Check the DTC. Refer to BRC-55, "DTC Index".
NO >> GO TO 5.
5.PERFORM THE SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “ENGINE”, “TRANSMISSION”.
Is any DTC detected? YES >> Check the DTC.
NO >> Replace ABS actuator and electric unit (control unit). Refer to BRC-136, "Removal and Installation".
Brake pedal vibration or operation sound occurs
Description
Brake pedal vibrates and motor sound from ABS actuator and electric unit
(control unit) occurs, when the
engine starts.
Brake pedal vibrates during braking.
CAUTION:
V ...
Normal operating condition
Description
Symptom
Result
Brake pedal slightly vibrates and operation sound (motor sound and
sound from suspension)
occurs when VDC function, TCS function, ABS function ...
Other materials:
Wiring diagram
CHASSIS CONTROL
Wiring Diagram
...
Safety belts
General information
The vehicle is fitted with five or seven safety
belts to ensure occupant safety. However, they
can only unfold their protective effect when adjusted
correctly.
Always make sure that safety belts are being
worn by the occupants before driving off. The
airbags supplement the safety ...
Precautions on cruise control
Precautions on cruise control
CANCEL switch
ACCEL/RES switch
COAST/SET switch
ON/OFF switch
If the cruise control system malfunctions, it
cancels automatically. The CRUISE indicator
light in the vehicle information display
then blinks to warn the driver. ...
