Nissan Rogue manuals

Nissan Rogue Service Manual: Unit disassembly and assembly

FRONT COMBINATION LAMP

Exploded View

Exploded View

  1. Front combination lamp
  2. Turn signal lamp bulb socket

Disassembly and Assembly

DISASSEMBLY

  1.  Remove front combination lamp. Refer to EXL-268, "Removal and Installation".
  2.  Rotate the turn signal lamp bulb socket counterclockwise and remove.
  3.  Remove the turn signal lamp bulb from the bulb socket.

ASSEMBLY

Assembly is in the reverse order of disassembly.

REAR COMBINATION LAMP

Exploded View

Exploded View

  1. Rear combination lamp
  2. Turn signal lamp bulb
  3.  Tail lamp bulb
  4.  Stop lamp bulb
  5. Rear combination lamp harness

Disassembly and Assembly

DISASSEMBLY

  1.  Remove rear combination lamp. Refer to EXL-278, "Removal and Installation".
  2.  Rotate the stop lamp bulb socket counterclockwise and remove.
  3.  Remove the stop lamp bulb from the bulb socket.
  4.  Rotate the tail lamp bulb socket counterclockwise and remove.
  5.  Remove the tail lamp bulb from the bulb socket.
  6.  Rotate the turn signal lamp bulb socket counterclockwise and remove.
  7.  Remove the turn signal lamp bulb from bulb socket.

ASSEMBLY

Assembly is in the reverse order of disassembly.

CAUTION: After installing, be sure to install the bulb sockets securely to ensure watertightness.

Removal and installation
FRONT COMBINATION LAMP Exploded View Front fender Front combination lamp Clip Removal and Installation REMOVAL  Remove front bumper fascia. Refer to EXT-17, "Removal a ...

Service data and specifications (SDS)
Bulb Specifications *: Always check with the Parts Department for the latest parts info. ...

Other materials:

System description
SYSTEM System Description SYSTEM DIAGRAM SYSTEM DESCRIPTION  The BCM has a CAN gateway function.  The BCM communicates between two CAN communication circuits.  The BCM selects and transmits only necessary information. DIAGNOSIS SYSTEM (CAN GATEWAY) CONSULT Function ...

Unit removal and installation
TRANSFER ASSEMBLY Exploded View 1 Transfer assembly : N·m (kg-m, ft-lb) *: Apply anti-corrosion oil. Removal and Installation NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling. REMOVAL  Remove front drive shaf ...

Heater and Air Conditioner (manual) (if so equipped)
Heater and Air Conditioner Fan speed control / system OFF dial / air conditioning (A/C) button   Air flow control buttons  Temperature control dial / MAX A/C button  Air recirculation button   Rear window and outside mirror (if so equipped) defroster but ...

© 2014-2022 Copyright www.nirogue.com