Nissan Rogue Service Manual: Unit disassembly and assembly
CENTER CONSOLE ASSEMBLY
Exploded View
- Center console cup holder (without
heated seats)
- Coin tray insert
- Center console cup holder (with
heated seats)
- Front heated seat switch (RH)
- Front heated seat switch (LH)
- Shift selector finisher
- Shift selector finisher mat
- Center console side finisher (RH)
- Center console side finisher (LH)
- Center console bin mat
- Center console tray
- Center console rear brace finisher
- Center console assembly
- Rear center ventilator grille
- Center console rear finisher
Metal clip
Clip
Pawl
Disassembly and Assembly
DISASSEMBLY
- Remove center console assembly. Refer to IP-18, "Removal and
Installation".
- Remove the center console bin mat. Refer to IP-25, "Exploded
View".
- Release clips using a suitable tool and remove shift selector
finisher.
: Metal clip
- Release clips and pawls using a suitable tool and remove center
console cup holder.
: Metal clip
: Pawl
- Release pawls and remove center console rear brace finisher. Refer to
IP-25, "Exploded View".
- Remove screws and center console tray. Refer to IP-25, "Exploded
View".
ASSEMBLY
Assembly is in the reverse order of disassembly.
Removal and Installation
REMOVAL
Release instrument side finisher (RH) (1) pawls using a suitable
tool and remove.
: Pawl
NOTE:
LH side shown; RH similar.
Release the glove box ...
Other materials:
Illumination
Wiring Diagram
...
Service data and specifications (SDS)
General specifications
Brake pedal
Brake booster
Front Disc Brake
Rear disc brake
...
P2004 intake manifold runner control valve
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P2004
TUMBLE CONT/V
(Intake manifold runner control stuck open
bank 1)
The target angle of intake manifold runner control valve controlled
b ...
В© 2014-2024 Copyright www.nirogue.com