Nissan Rogue Service Manual: Tightening torque of standard bolts
Description
This vehicle has both new standard based on ISO* and previous standard bolts/nuts. There are some differences between these two types of bolts/ nuts; shape of the head, grade of strength, hexagonal width across flats and the standard tightening torque.
- For guidance in discriminating, refer to GI-19, "Tightening Torque Table (New Standard Included)".
- If the tightening torque is not described in the description or figure, refer to GI-19, "Tightening Torque Table (New Standard Included)".
*ISO: International Organization for Standardization
Abbreviations
Abbreviation List
The following ABBREVIATIONS are used:
...
Tightening Torque Table (New Standard Included)
CAUTION:
The special parts are excluded.
The bolts/nuts in these tables have a strength (discrimination)
number/symbol assigned to the head
or the like. As to the relation betwe ...
Other materials:
Diagnosis system (BCM) (with intelligent key system)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic ...
Child restraint systems
with tether strap
Safety information
Warning
If the upper retaining strap is incorrectly used
for the child restraint system, the protective effect
is reduced. There is a risk of injury. Make
sure that the upper retaining strap does not run
over sharp edges and is not twisted as it
passes the upper anchor.
Warning
If ...
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
...
