Nissan Rogue Owners Manual: Three-way catalyst
The three-way catalyst is an emission control
device installed in the exhaust system. Exhaust
gases in the three-way catalyst are burned at
high temperatures to help reduce pollutants.
WARNING
- The exhaust gas and the exhaust system
are very hot. Keep people, animals
or flammable materials away from the
exhaust system components.
- Do not stop or park the vehicle over
flammable materials such as dry grass,
waste paper or rags. They may ignite
and cause a fire.
|
CAUTION
- Do not use leaded gasoline. Deposits
from leaded gasoline will seriously reduce
the three-way catalyst’s ability to
help reduce exhaust pollutants.
- Keep your engine tuned up. Malfunctions
in the ignition, fuel injection, or
electrical systems can cause overrich
fuel flow into the three-way catalyst,
causing it to overheat. Do not keep driving
if the engine misfires, or if noticeable
loss of performance or other unusual
operating conditions are
detected. Have the vehicle inspected
promptly by a NISSAN dealer.
- Avoid driving with an extremely low fuel
level. Running out of fuel could cause
the engine to misfire, damaging the
three-way catalyst.
- Do not race the engine while warming it
up.
- Do not push or tow your vehicle to start
the engine.
|
WARNING
Do not breathe exhaust gases; they
contain colorless and odorless carbon
monoxide. Carbon monoxide is dangerous.
It can cause unconsciousness or
death.
&nb ...
Each tire, including the spare (if provided),
should be checked monthly when cold and inflated
to the inflation pressure recommended by
the vehicle manufacturer on the vehicle placard
or tire infl ...
Other materials:
System
System Description
SYSTEM DIAGRAM
POWER WINDOW OPERATION
Main power window and door lock/unlock switch can open/close all
windows.
Front and rear power window switches can open/close the
corresponding windows.
POWER WINDOW AUTO-OPERATION (FRONT DRIVER SIDE)
AUTO UP/DOW ...
Removal and installation
HORN
Exploded View
Horn (LOW)
Horn (HIGH)
Removal and Installation
REMOVAL
Horn (LOW)
Remove the front grille. Refer to EXT-23, "Removal and
Installation".
Disconnect the harness connectors from the horn (LOW).
NOTE:
Before disconnecting the harn ...
Control Display
Brightness
1. "CAR".
2. "Settings".
3. "Displays".
4. "Control display".
5. "Brightness at night".
6. Press the Controller.
7. Turn the Controller until the desired brightness
is set.
8. Press the Controller.
Depending on the light conditions, the brightness
settings may not be clearly visib ...
© 2014-2022 Copyright www.nirogue.com