Nissan Rogue Service Manual: The parking brake release warning continues sounding, or does not sound
Description
- The parking brake warning buzzer sounds continuously during vehicle travel though the parking brake is released.
- The parking brake warning buzzer does not sound at all even though driving the vehicle with the parking brake applied.
Diagnosis Procedure
1. CHECK PARKING BRAKE WARNING LAMP
- Start the engine.
- Check the operation of the brake warning lamp by operating the parking brake.
Is the inspection result normal? YES >> Replace the combination meter. Refer to MWI-82, "Removal and Installation".
NO >> GO TO 2.
2. CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT
Check the parking brake switch signal circuit. Refer to WCS-45, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace harness or connector.
3. CHECK PARKING BRAKE SWITCH UNIT
Check the parking brake switch. Refer to WCS-46, "Component Inspection".
Is the inspection result normal? YES >> Replace the combination meter. Refer to MWI-82, "Removal and Installation".
NO >> Replace the parking brake switch. Refer to PB-7, "Exploded View".
Warning chime system symptoms
Symptom Table
CAUTION:
Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform
the trouble diagnosis
if any DTC is detected.
...
The seat belt reminder warning continues sounding, or
does not sound
Description
Seat belt warning does not sound even though driver seat belt is not
fastened.
Seat belt warning sounds even though driver seat belt is fastened.
Diagnosis Procedure
1.C ...
Other materials:
Precautions on cruise control
Precautions on cruise control
CANCEL switch
ACCEL/RES switch
COAST/SET switch
ON/OFF switch
If the cruise control system malfunctions, it
cancels automatically. The CRUISE indicator
light in the vehicle information display
then blinks to warn the driver. ...
System description
COMPONENT PARTS
Component Parts Location
No.
Component
Description
1
Push-button ignition
switch1
Push-button ignition switch (push switch) is pressed (ON), and
transmits status signal to BCM
and IPDM E/R.
Ignition switch2
Ignition ...
Indicator/warning lights, Red lights
Principle
Indicator/warning lights in the instrument cluster
display the status of some functions in the vehicle
and indicate when a fault is present in the
monitored systems.
General information
The indicator/warning lights can light up in a variety
of combinations and colors.
Several of the light ...
