Nissan Rogue manuals

Nissan Rogue Owners Manual: Text messaging

WARNING
  •  Laws in some jurisdictions may restrict the use of “Text-to-Speech”. Check local regulations before using this feature.
  •  Laws in some jurisdictions may restrict the use of some of the applications and features, such as social networking and texting. Check local regulations for any requirements.
  •  Use the text messaging feature after stopping your vehicle in a safe location.

    If you have to use the feature while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.

  •  If you are unable to devote full attention to vehicle operation while using the text messaging feature, pull off the road to a safe location and stop your vehicle.

The system allows for the sending and receiving of text messages through the vehicle interface.

Sending a text message:

  1.  Press the button on the steering wheel.
  2.  Say “Phone” after the tone.
  3.  Say “Send Text” after the tone.
  4.  The system will provide a list of available commands in order to determine the recipient of the text message. Choose from the following:

For additional information about these options, refer to “Voice commands” in this section.

  1.  Once a recipient is chosen, the system prompts for which message to send. Nine predefined messages are available as well as three custom messages. To choose one of the predefined messages, speak one of the following after the tone:

To send one of the custom messages, say “Custom Messages”. If more than one custom message is stored, the system will prompt for the number of the desired custom message.

For additional information on setting and managing custom text messages, refer to “Bluetooth® settings” in this section.

Reading a received text message:

  1.  Press the button on the steering wheel.
  2.  Say “Phone” after the tone.
  3.  Say “Read Text” after the tone.

The text message, sender and delivery time are shown on the screen. Use the tuning switch to scroll through all text messages if more than one are available. Press the button to exit the text message screen. Press the button to access the following options for replying to the text message:

NOTE: Text messages are only displayed if the vehicle speed is less than 5 mph (8 km/h).

Vehicle phonebook
To access the vehicle phonebook:  Press the button on the control panel.  Touch the “Phonebook” key.  Choose the desired entry from the displayed list.  The num ...

Phone settings
To access the phone settings:  Press the [ ] button.  Touch the “Settings” key.  Touch the “Phone & Bluetooth” key. . Touch the “Phone Settings” key and adjust ...

Other materials:

Power supply and ground circuit
Diagnosis Procedure Regarding Wiring Diagram information, refer to PCS-24, "Wiring Diagram". 1. CHECK FUSE AND FUSIBLE LINKS Check that the following IPDM E/R fuse or fusible links are not blown. Is the fuse blown? YES >> Replace the blown fuse or fusible link after repairin ...

Diagnosis and repair work flow
Work Flow NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

Display on the Control Display - With Parking Assistant: Parking Assistant
Display on the Control Display System activated/deactivated Gray: the system is not available. White: the system is available but not activated. System is activated. Parking space search is active. The parking operation is active. The system takes over the steering. Parking space search and ...

© 2014-2022 Copyright www.nirogue.com