Nissan Rogue manuals

Nissan Rogue Service Manual: System description

DESCRIPTION

Engine Cooling System

Engine Cooling System

  1. Thermostat
  2. Water outlet
  3. Cylinder block (Thermostat housing)
  4.  Water inlet
  5. Radiator
  6.  Water pump
  7.  Cylinder block
  8.  Cylinder head
  1.  Open
  2.  Closed
  3. To electric throttle control actuator
  4. To oil cooler
  5.  To heater
  6. From heater
  7.  From electric throttle control actuator
  8.  From oil cooler

Engine Cooling System Schematic

Engine Cooling System Schematic

  1. Radiator
  2. Water inlet
  3. Reservoir tank
  4.  Thermostat
  5. Thermostat housing
  6. Water pump
  7.  Cylinder head
  8. Cylinder block
  9. Water outlet
  10.  Heater
  11. Oil cooler
  12. Electric throttle control actuator
  1. Open
  2. Closed
Preparation
Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description KV991J0070 (J-45695-A) ...

Symptom diagnosis
OVERHEATING CAUSE ANALYSIS Troubleshooting Chart ...

Other materials:

Preparation
Special Service Tools The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description — (J-44372) Pull gauge Measuring steering wheel turning force, rack sliding force and ball joint swinging ...

Brake warning lamp
Component Function Check 1.CHECK BRAKE WARNING LAMP FUNCTION Check that brake warning lamp in combination meter turns ON for 1 second after ignition switch is turned ON. CAUTION: Never start the engine. Is the inspection result normal? YES >> GO TO 2. NO >> Proceed to BRC-12 ...

Tire pressure
General information The tire characteristics and tire pressure influence the following: The service life of the tires. Driving safety. Driving comfort. Fuel consumption. Safety information Warning A tire with too little or no tire inflation pressure may heat up significantly and sustain damage ...

© 2014-2022 Copyright www.nirogue.com