INTERIOR LIGHTING SYSTEM SYMPTOMS
Symptom Table
CAUTION: Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected.
Symptom |
Possible cause |
Inspection item |
All the following lamps do not turn ON.
|
|
Interior room lamp power supply circuit Refer to INL-46. |
|
|
Door switch circuit
Refer to DLK-149,
"Component Function Check" (with
Intelligent Key system) or DLK-319,
"Component Function Check" (without
Intelligent Key system).
Interior room lamp control circuit Refer to INL-49. |
Interior room lamp timer does not activate.
(It turns ON/ OFF when the door opens/closes.) |
— |
Check the interior room lamp setting.
Refer to INL-9, "INTERIOR ROOM LAMP BATTERY SAVER SYSTEM : System Description". |
|
|
Back door switch circuit Refer to DLK-151, "Component Function Check" (with Intelligent Key system) or DLK-319, "Component Function Check" (without Intelligent Key system). |
Luggage room lamp circuit Refer to INL-51. | ||
Power switch illumination does not illuminate. |
|
Power switch illumination circuit Refer to INL-52. |
Interior room lamp battery saver does not activate. | BCM | Replace BCM.
Refer to BCS-75, "Removal and Installation" (with Intelligent Key system) or BCS-135, "Removal and Installation" (without Intelligent Key system). |
Steering angle sensor
Exploded View
Combination switch
Steering angle sensor
Spiral cable
Removal and Installation
Removal and Installation
Remove the spiral cable. Refer to SR-15, "Exploded View".
Remove screws (A) and then remove steering angle sensor (1).
INSTALLATI ...
NissanConnectSM with Mobile Apps
(if so equipped)
This vehicle is equipped with Smartphone Integration
technology. This allows many compatible
Smartphone applications to be displayed and
easily controlled through the vehicle’s touchscreen.
NOTE:
A compatible smartphone and registration
is required to use mobile applications or to
access ...
ID registration procedure
Description
This procedure must be performed after replacement of a tire pressure sensor
or BCM.
Work Procedure
TPMS ID registration can be performed using one of the following procedures:
Transmitter Activation tool [KV48105501 (J-45295-A)] with CONSULT
(preferred method)
...