Nissan Rogue Service Manual: Symptom diagnosis
- Power window control system symptoms
- None of the power windows can be operated using any switch
- Driver side power window does not operate
- Front passenger side power window does not operate
- Rear LH side power window does not operate
- Rear RH side power window does not operate
- Anti-pinch system does not operate normally (driver side)
- Power window retained power operation does not operate properly
- Auto operation does not operate but manual operate normally (driver side)
- Power window lock switch does not function
Door switch
WITH INTELLIGENT KEY
WITH INTELLIGENT KEY : Component Function Check
1.CHECK FUNCTION
Select "DOOR LOCK" of "BCM" using CONSULT.
Select "DOOR SW-DR", ...
Power window control system symptoms
Symptom Table
Symptom
Reference page
None of the power windows can be operated using any switch.
Refer to PWC-55, "Diagnosis Procedure".
Driver side p ...
Other materials:
C1735 ignition signal
DTC Logic
NOTE:
The Signal Tech II Tool [- (J-50190)] can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS sensor
Read TPMS DTC ...
System
WARNING CHIME SYSTEM
WARNING CHIME SYSTEM : System Description
SYSTEM DIAGRAM (WITH INTELLIGENT KEY SYSTEM)
SYSTEM DIAGRAM (WITHOUT INTELLIGENT KEY SYSTEM)
COMBINATION METER INPUT/OUTPUT SIGNAL (CAN COMMUNICATION SIGNAL)
Input signal
Output signal
BCM INPUT/OUTPUT SIGNAL (CAN ...
Diagnosis system (BCM) (without intelligent key system)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic M
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic Res ...
