Nissan Rogue Service Manual: Symptom diagnosi

Nissan Rogue Service Manual / Engine / Engine Mechanical / Symptom diagnosi

NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING

NVH troubleshooting - engine noise

NVH troubleshooting - engine noise

Valve mechanism
Intake and exhaust valve
Water pump
Timing chain
Drive belt
Rotation mechanism

Tappet noise
Camshaft bearing noise
Water pump noise
VTC noise
Timing chain and chain tensioner noise
Drive belt noise (slipping)
Main bearing noise
Connecting rod bearing noise
Piston pin noise
Piston slap noise

Use the chart below to help you find the cause of the symptom

Locate the area where noise occurs.
Confirm the type of noise.
Specify the operating condition of engine.
Check specified noise source.

If necessary, repair or replace these parts.

Use the chart below to help you find the cause of the symptom

A: Closely related B: Related C: Sometimes related —: Not related

Liquid Gasket

REMOVAL OF LIQUID GASKET SEALING After removing the bolts and nuts, separate the mating surface and remove the liquid gasket using Tool (A). Tool Number : KV10111100 (J-37228) CAUTION: Be c ...

Preparation

Special service tools The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description — (J-48891) Spark p ...

Other materials:

Under cover
Exploded View Floor under cover (RH) Engine under cover Floor under cover (LH) ENGINE UNDER COVER ENGINE UNDER COVER : Removal and Installation REMOVAL Remove engine under cover clips. Remove engine under cover. INSTALLATION Installation is in the reverse ord ...

Unit removal and installation
FRONT SUSPENSION MEMBER Exploded View Front suspension member Strut mounting bearing Rebound stopper insulator Rebound stopper Removal and Installation REMOVAL Remove the wheel and tire using power tool. Refer to WT-60, "Removal and Installation&quo ...

Additional service when replacing transaxle assembly
Description Perform the following work after the transaxle assembly is replaced. WRITING TCM DATA TCM performs accurate control by retrieving data (inherent characteristic value) of each solenoid. For this reason, after replacing transaxle assembly, it is necessary to write new d ...